Engine Cooling

General chat place.
Post Reply
User avatar
PeterB
Posts: 225
Joined: Wed Jun 21, 2006 12:28 pm
Location: Port Elizabeth

Engine Cooling

Post by PeterB » Mon May 26, 2008 3:52 pm

I opened the aperture of my exit ramp by 30mm so now the total opening size is 110mm and my 120Hp Jabiru motor is now running around 90' on oil temp and between 150' - 175' on CHT which is spot on the numbers
:D to climb now without the temps going thru the roof!!
Attachments
exit%20ramp.JPG
exit%20ramp.JPG (81.46 KiB) Viewed 3110 times

Post Reply