Morne Nortier's X350

Share details of your Whisper project with the community.
MNortier
Posts: 109
Joined: Sat May 09, 2015 6:02 pm
Closest Airfield: FAOH
Location: FAOH

Re: Morne Nortier's X

Post by MNortier » Sun Nov 29, 2015 6:12 pm

Sure is quite here...hope all X builders are busy building.... :)
Attachments
WP_20151128_19_35_58_Pro.jpg
WP_20151128_19_35_58_Pro.jpg (112.34 KiB) Viewed 4345 times
WP_20151128_18_31_23_Pro.jpg
WP_20151128_18_31_23_Pro.jpg (97 KiB) Viewed 4346 times
WP_20151128_19_28_58_Pro.jpg
WP_20151128_19_28_58_Pro.jpg (108.13 KiB) Viewed 4346 times
Last edited by MNortier on Sun Nov 29, 2015 6:15 pm, edited 1 time in total.

MNortier
Posts: 109
Joined: Sat May 09, 2015 6:02 pm
Closest Airfield: FAOH
Location: FAOH

Re: Morne Nortier's X

Post by MNortier » Sun Nov 29, 2015 6:14 pm

Glassing the T/E and L/E...
Attachments
WP_20151128_20_43_28_Pro.jpg
WP_20151128_20_43_28_Pro.jpg (215.57 KiB) Viewed 4345 times
WP_20151129_17_55_10_Pro.jpg
WP_20151129_17_55_10_Pro.jpg (227.63 KiB) Viewed 4345 times
WP_20151129_17_55_39_Pro.jpg
WP_20151129_17_55_39_Pro.jpg (122.03 KiB) Viewed 4345 times

MNortier
Posts: 109
Joined: Sat May 09, 2015 6:02 pm
Closest Airfield: FAOH
Location: FAOH

Re: Morne Nortier's X

Post by MNortier » Mon Nov 30, 2015 10:35 pm

Making bush for aligning hinge wire.....hinging done - will fill the gap later...
Attachments
WP_20151130_16_38_04_Pro.jpg
WP_20151130_16_38_04_Pro.jpg (205.87 KiB) Viewed 4338 times
WP_20151130_17_36_20_Pro.jpg
WP_20151130_17_36_20_Pro.jpg (146.65 KiB) Viewed 4338 times
WP_20151130_22_28_16_Pro.jpg
WP_20151130_22_28_16_Pro.jpg (188.77 KiB) Viewed 4338 times

Brett
Posts: 40
Joined: Fri Nov 02, 2012 9:10 pm

Re: Morne Nortier's X

Post by Brett » Wed Dec 02, 2015 8:53 pm

You are going nicely Morne.

MNortier
Posts: 109
Joined: Sat May 09, 2015 6:02 pm
Closest Airfield: FAOH
Location: FAOH

Re: Morne Nortier's X

Post by MNortier » Mon Dec 07, 2015 11:57 am

Rudder skinned and fitted...
Attachments
WP_20151206_17_24_33_Pro.jpg
WP_20151206_17_24_33_Pro.jpg (106.69 KiB) Viewed 4312 times
WP_20151206_17_14_56_Pro.jpg
WP_20151206_17_14_56_Pro.jpg (105.56 KiB) Viewed 4312 times
WP_20151206_17_37_54_Pro.jpg
WP_20151206_17_37_54_Pro.jpg (108.04 KiB) Viewed 4312 times

MNortier
Posts: 109
Joined: Sat May 09, 2015 6:02 pm
Closest Airfield: FAOH
Location: FAOH

Re: Morne Nortier's X

Post by MNortier » Sun Dec 13, 2015 10:34 am

Adding some dead weight to fin....machining the elevator drive shaft as the stock is rather not round... :)
Attachments
WP_20151210_11_34_42_Pro.jpg
WP_20151210_11_34_42_Pro.jpg (110.96 KiB) Viewed 4296 times
WP_20151211_17_08_22_Pro.jpg
WP_20151211_17_08_22_Pro.jpg (91.44 KiB) Viewed 4296 times

MNortier
Posts: 109
Joined: Sat May 09, 2015 6:02 pm
Closest Airfield: FAOH
Location: FAOH

Re: Morne Nortier's X

Post by MNortier » Sun Dec 13, 2015 10:36 am

Rigging th rudder and tailwheel...
Attachments
WP_20151209_19_49_37_Pro.jpg
WP_20151209_19_49_37_Pro.jpg (138.42 KiB) Viewed 4296 times
WP_20151209_22_01_18_Pro.jpg
WP_20151209_22_01_18_Pro.jpg (109.96 KiB) Viewed 4296 times
WP_20151210_18_02_14_Pro.jpg
WP_20151210_18_02_14_Pro.jpg (117.59 KiB) Viewed 4296 times

MNortier
Posts: 109
Joined: Sat May 09, 2015 6:02 pm
Closest Airfield: FAOH
Location: FAOH

Re: Morne Nortier's X

Post by MNortier » Sun Dec 13, 2015 10:38 am

more...
Attachments
WP_20151210_15_03_41_Pro.jpg
WP_20151210_15_03_41_Pro.jpg (112.54 KiB) Viewed 4296 times

MNortier
Posts: 109
Joined: Sat May 09, 2015 6:02 pm
Closest Airfield: FAOH
Location: FAOH

Re: Morne Nortier's X

Post by MNortier » Sun Dec 13, 2015 10:39 am

Making the cuff and elevator pushrod..
Attachments
WP_20151211_18_49_50_Pro.jpg
WP_20151211_18_49_50_Pro.jpg (88.57 KiB) Viewed 4296 times
WP_20151213_09_48_25_Pro.jpg
WP_20151213_09_48_25_Pro.jpg (161.7 KiB) Viewed 4296 times

MNortier
Posts: 109
Joined: Sat May 09, 2015 6:02 pm
Closest Airfield: FAOH
Location: FAOH

Re: Morne Nortier's X

Post by MNortier » Sun Dec 13, 2015 10:41 am

Primed some interior just to get feel....modifying canopy frame and repairing the cuts...
Attachments
WP_20151213_09_48_43_Pro.jpg
WP_20151213_09_48_43_Pro.jpg (105.79 KiB) Viewed 4296 times
WP_20151212_16_20_38_Pro.jpg
WP_20151212_16_20_38_Pro.jpg (132.44 KiB) Viewed 4296 times

Post Reply