Sean Selkon's Whisper

Share details of your Whisper project with the community.

Re: Dene Collett's work of art

Postby PeterB » Tue Mar 04, 2008 8:19 am

Dene i will definitely be calling on you, when you are finished with this project of course to sort out my cowling as far as the tacky mess i have been left with regarding the oil cooler :oops:
Attachments
DSC00540.JPG
DSC00540.JPG (235.01 KiB) Viewed 13210 times
User avatar
PeterB
 
Posts: 225
Joined: Wed Jun 21, 2006 12:28 pm
Location: Port Elizabeth

Re: Sean Selkon's Whisper

Postby whisper » Tue Mar 04, 2008 4:08 pm

ok so when do you awaken those 6 cylinders for the first time :?: :)
whisper
Site Admin
 
Posts: 480
Joined: Mon Jul 19, 2004 2:26 pm
Location: Port Elizabeth

Re: Sean Selkon's Whisper

Postby Dene Collett » Sun Mar 09, 2008 8:26 pm

I had the first engine run today and I am pretty pleased with the results. The OAT was 36.5deg C and with a run at 2500 rpm for +/- 8min after warmup I never saw a cylinder head temp over 150degC or an oil temp over 75degC. I realize that there is a big difference between a static run and a genuine full power climb but the results look promising. First flight immenent, stay tuned! :twisted:
Dene Collett
freelance Whisper assembler
e-mail: avlec@telkomsa.net
Cell: 0845805003
Dene Collett
 
Posts: 7
Joined: Thu Dec 30, 2004 10:18 pm
Location: Port Elizabeth

Re: Sean Selkon's Whisper

Postby whisper » Thu May 15, 2008 10:57 am

Sean's aircraft has had one flight of about 20 minutes. All went well.
Pics below show the proud builder (Dene Collett) moments after the flight. I believe it is safe to say that this is currently the best finished Whisper so far. Dene has gone to great lengths to show that an "amateur" built aircraft can in fact be better in all respects to a mass produced factory aircraft. I believe this has been achieved.
It is not to say that a better Whisper cannot be built but the bar has now been set quite high :D
Attachments
dene3.JPG
dene3.JPG (94.97 KiB) Viewed 13140 times
dene2.JPG
dene2.JPG (111.95 KiB) Viewed 13135 times
dene1.JPG
dene1.JPG (59.85 KiB) Viewed 13135 times
whisper
Site Admin
 
Posts: 480
Joined: Mon Jul 19, 2004 2:26 pm
Location: Port Elizabeth

Re: Sean Selkon's Whisper

Postby whisper » Mon May 19, 2008 11:55 am

ZU-GAS has had a few more flights and all is going well :D
BTW this is the 15th Whisper to fly.
whisper
Site Admin
 
Posts: 480
Joined: Mon Jul 19, 2004 2:26 pm
Location: Port Elizabeth

Re: Sean Selkon's Whisper

Postby whisper » Thu Jun 19, 2008 11:30 am

Looking smart with spats on
Attachments
sean.JPG
sean.JPG (88.77 KiB) Viewed 13074 times
whisper
Site Admin
 
Posts: 480
Joined: Mon Jul 19, 2004 2:26 pm
Location: Port Elizabeth

Re: Sean Selkon's Whisper

Postby whisper » Sun Jun 29, 2008 9:21 pm

Sean blasted off back to Joburg just as we were being hammered by a particularly miserable cold front. I suspect he and Deon are a little saddle sore as the flight was likely to be rather long against about a 30-40kt headwind and some rain to dodge. But apparently ZU-GAS is nestled alongside ZU-GMW at Springs
whisper
Site Admin
 
Posts: 480
Joined: Mon Jul 19, 2004 2:26 pm
Location: Port Elizabeth

Re: Sean Selkon's Whisper

Postby navajo » Mon Jun 30, 2008 4:01 pm

Well, it was an interesting flight back in probably the crappiest weather so far this year. Now I remember why I fly IFR for a living! ZU-GAS went like a dream, even in the potent crosswind landings at all 4 of our stops. I have not been able to fly since, as the sight gauge decided to pop and fill the aircraft with 80 litres of avgas. We got as much as we could find out of the fuselage, but there is no way I am getting a flight until the smell diminishes. I am still floating from the fumes of the cleanup.

I have had the decals put on and will post a pic as soon as i remember my camera.
navajo
 
Posts: 10
Joined: Wed May 17, 2006 11:46 am
Location: Springs

Re: Sean Selkon's Whisper

Postby navajo » Tue Aug 12, 2008 10:03 am

Well, ZU-GAS had all its avionics connected only to find that the GTX327 transponder from Garmin was U/S. This seems to be my luck, as I had the same with the Dynon on first installation. However, Century Avionics have promised me that a new unit will arrive next week. The spats have been taken off for some cosmetic "surgery", but other than that, she is up and running.
GAS1.jpg
GAS1.jpg (69.26 KiB) Viewed 12948 times

GAS7.jpg
GAS7.jpg (27.25 KiB) Viewed 12946 times
navajo
 
Posts: 10
Joined: Wed May 17, 2006 11:46 am
Location: Springs

Re: Sean Selkon's Whisper

Postby Dene Collett » Sat Nov 01, 2008 11:48 am

Just in case you were wondering, no that is not a run in the paint on the fin!! :)
Attachments
Rudder.jpg
Rudder.jpg (251 KiB) Viewed 12865 times
Dene Collett
freelance Whisper assembler
e-mail: avlec@telkomsa.net
Cell: 0845805003
Dene Collett
 
Posts: 7
Joined: Thu Dec 30, 2004 10:18 pm
Location: Port Elizabeth

Previous

Return to My Whisper Project

Who is online

Users browsing this forum: No registered users and 2 guests

cron